LD 160AT
LD 160 series are LDPE grades, which offer good draw down and optical properties.
LD 160 series are LDPE grades, which offer good draw down and optical properties.
Resin properties :
| Resin Properties |
Typical Value
|
Test Based On |
| Density |
0.923 g/cm³
|
ASTM D1505
|
| Melt Index (190°C/2.16 kg) |
4.0 g/10 min
|
ASTM D1238 |
| Peak Melting Temperature | 226 F° | ExxonMobil Method |
Thermal :
| Thermal |
Typical Value (English)
|
Typical Value (SI)
|
Test Based On |
| Vicat Softening Temperature |
259 °F
|
126 °C
|
ASTM D1525 |
Film properties :
| Molded Properties |
Typical Value
|
Test Based On |
| Tensile Strength at Yield MD |
1500 Psi |
ASTM D882 |
| Tensile Strength at Yield TD |
1400 Psi |
ASTM D882 |
| Tensile Strength at Break MD |
3300 Psi |
ASTM D882 |
| Tensile Strength at Break TD |
2200 Psi |
ASTM D882 |
| Elongation at Break MD |
180 %
|
ASTM D882 |
| Elongation at Break TD |
990 %
|
ASTM D882 |
| Secant Modulus MD – 1% Secant |
25000 Psi
|
ASTM D882 |
| Secant Modulus TD – 1% Secant |
30000 Psi
|
ASTM D882 |
| Dart Drop Impact |
70 g
|
ASTM D1709A |
| Elmendorf Tear Strength MD |
290 g
|
ASTM D1922 |
| Elmendorf Tear Strength TD |
110 g
|
ASTM D1922 |
Optical Properties :
|
Typical Value (SI)
|
Test Based On | |
| Gloss (45°) | 71 | ASTM D2457 |
| Haze | 5.2% | ASTM D1003 |